Home Pricing Features Docs Tutorials Blog Changelog Start free trial
All tutorials

Episode 3

How to Use the Magic Sheet and Set Element Rates

Finish the breakdown and link tags to existing elements, set story days, check the whole breakdown on the Magic Sheet, tick cast into scenes they have no lines in, give an element a daily rate, connect it to a character and add a costume item.

Loads from YouTube on play

Recorded against The Long Way Home. To build the same project as you watch, download the project files (5 MB).

In this episode

  • 0:00 Introduction
  • 0:19 Finishing the breakdown
  • 1:57 Story days
  • 2:48 The Magic Sheet
  • 5:18 The Elements page
  • 6:24 Connecting elements to characters
  • 7:46 Summary and next steps

In the last episode we tagged two scenes of The Long Way Home. In this episode we finish the breakdown for the whole script, set the story days, check everything at once on the Magic Sheet, and give our first element a daily rate so it’s ready for the budget. For the wider picture, see the script breakdown software page.


Step 1: Finish the Breakdown

Scene 14 still has auto-tag suggestions waiting from Episode 2. Accept the rain, because the special effects team has to make it.

  1. On the Script breakdown page, with scene 14 selected, click the tick on the RAIN suggestion. RAIN lands on the Special Effects card.

Every scene that has the camper van in it needs the same element, so the van in scene 2 has to become Beverly too.

  1. Select scene 2 and turn on tagging mode.
  2. Highlight the word van in “Behind them Dot loads the van” and choose Vehicles in the popup.
  3. Click the new van chip, type Beverly and press Return.
  4. Right-click the Beverly chip and choose Promote to element.

Because an element called Beverly already exists, FilmBase doesn’t make a second one. The notice says the tag was linked to the existing element, so all of Beverly’s scenes count towards the same element.

Those are all the steps the breakdown needs: tag by hand or accept a suggestion, rename the chip when it has to match an element, and promote it. In the video, a pause card lists the rest, and this is the longest pause in the series. Pause and tag the other scenes the same way. Auto-tagging with All scenes, which we ran in the last episode, has already suggested most of them, so accepting suggestions saves a lot of typing. Spell the names like this, because a tag’s name becomes the element’s name:

  • Vehicles: Beverly in scenes 2, 3, 4, 5, 7, 8, 12 to 20 and 24, plus Duarte's tow truck, Sheriff's cruiser, Tess's hatchback, Rowboat, School bus and Tractor.
  • Animals: GOOSE and Biscuit (the dog).
  • Stunts: Milo's stunt double in scenes 14 and 22.
  • Background Actors: Market shoppers and Brass band in scene 14, and the other background actors in the follow-along guide.
  • Special Effects: Radiator steam, Exhaust smoke, Lake mist and Neon sign. Leave RAIN in scene 14 only. We tick it into the next two scenes on the Magic Sheet below.
  • Visual Effects: Geese in a V and Goose in the final photo.
  • Props, wardrobe, set dressing and makeup: every scene’s list is in the follow-along guide.

Tag Beverly, the gnome and the goose in their other scenes too, and promote each one so it joins the element we already have.

Then a second pause card lists what to promote, which is everything the production has to find and pay for: Duarte’s tow truck, Sheriff’s cruiser, Tess’s hatchback, Rowboat, Biscuit, Milo’s stunt double, Market shoppers, Brass band and the Polaroid camera. Leave RAIN as a tag for now, because we promote it from the Magic Sheet later in this episode.

Every tag and the scenes it goes in are in the follow-along guide in the project files on the series page.


Step 2: Set the Story Days

A story day is the day in the story when a scene takes place, which is different from the day you shoot it. Our story starts on a Thursday night, so scene 1 is Day 1, and the road trip begins the next morning in scene 2, which is Day 2.

  1. On the Script breakdown page, select scene 1.
  2. Click Set story day under the scene heading, type 1 and press Return. The pill reads Day 1.
  3. Select scene 2 and set it to 2.

Both scene cards in the list now carry a story-day badge.

Story days matter to the costume, hair and makeup departments. Everything a character wears on Day 2 has to match across every Day 2 scene, even when those scenes are shot a week apart.

In the video, a pause card lists the rest of the story days, and so does the follow-along guide. Pause and set them the same way: scenes 3 to 11 are Day 2, scenes 12 to 20 are Day 3, and scenes 21 to 25 are Day 4.


Step 3: Open the Magic Sheet

  1. Select Magic Sheet in the Script sidebar.

It’s the whole breakdown on one grid. Every tagged item has a row, with its category, and every scene has a column, with its scene number, INT or EXT and a story-day badge. A tick means the item is in that scene. It’s the quickest way to spot a gap, such as a prop that appears in scene 10 but was never tagged in scene 6.


Step 4: Filter the Sheet and Tick Cast Into Their Silent Scenes

The Categories menu in the toolbar decides which rows you see, and the filter box on the right narrows the columns.

  1. Open Categories (it reads All categories), click None, then tick Cast Members. The sheet shows only the nine characters.
  2. Type 20-25 into the filter box (“Filter scenes: 1-5, 8, INT…”). Only the lake scenes at the end of the script are left.

Look at GUS. He has ticks in scenes 21 and 23, where he speaks. He’s also on the dock in scene 22 and in the final photo in scene 25, but he has no lines there, so the import couldn’t know.

  1. Click GUS’s empty cells in scenes 22 and 25 to tick them.

On a cast row, a tick also tells the schedule that the actor is needed that day, which is why it’s worth getting right.

Dot and Milo are in a few silent moments too.

  1. Tick DOT in scenes 20 and 22, and MILO in scene 20.
  2. Clear the filter box. DOT is also in scenes 8 and 18 without a line, which a pause card in the video shows. Pause and tick DOT in scenes 8 and 18 as well.

Step 5: Tick Several Scenes at Once

To tick a run of scenes, press on a cell and drag across the others. Starting on an empty cell ticks every cell you pass, and starting on a ticked cell clears them.

  1. Open Categories and click Select all.
  2. Find the RAIN row under Special Effects. Its only tick is scene 14.
  3. Press on the empty cell for scene 15 and drag to scene 16. Both cells fill with ticks.

The rain carries on from the market into the next two scenes, so one drag covers both.


Step 6: Switch to Story Days and Promote From the Sheet

The switch at the left of the toolbar changes the columns from scenes to story days.

  1. Click the Scenes / Story days switch to Story days. The columns become Day 1 to Day 4.

Each column then stands for a whole day of the story, which is the view the costume team wants when they plan who wears what.

  1. Switch back to Scenes.

You can promote from here too. Rain towers are hired by the day, so the rain should be an element.

  1. Right-click the RAIN row and choose Promote to element.

The row gets the box icon that marks elements on the sheet.


Step 7: Rename and Rate Elements on the Elements Page

  1. Select Elements in the sidebar. The list shows every element in the project, each with its category and a count of days.

An element’s name is what the schedule, the call sheets and the budget show, so it’s worth making it clear. The goose has a name in the story.

  1. Select GOOSE, select its name and type The Colonel (goose), with goose in brackets so everyone can see what the element is. Save, and the list reads The Colonel (goose).
  2. Select Beverly.
  3. Type a Description: 1970s camper van, mint and cream, pop-top roof.
  4. Set Quantity to 2, because a hero picture car needs a backup.
  5. Set Status to In progress. Status tracks where the element is up to, from Not started to Wrapped.
  6. Type 350 into Rate and leave the unit on Day.
  7. Click Save changes.

Usage days reads 0 for now. It counts the shoot days Beverly’s scenes are scheduled on, so it fills in once we build the schedule, and so does Est. Total. Auto-sync to budget when schedule changes keeps the budget line in step with the schedule.


Step 8: Connect an Element to a Character

On the Characters page, you can connect an element to the character it belongs to. Dot is the one who drives Beverly.

  1. Select Characters in the sidebar and select DOT.
  2. Scroll to Connected elements and click Connect an element.
  3. In the Connect element dialog, search Bev and select Beverly.
  4. Set Link as to Drives, click Link, then Done.

The connection shows on both sides, on the character and on the element, so the transport and art departments see the same thing.

If a script calls one person by two names, you can merge them on this page. Select both names with Command-click (Control-click on Windows) and click Merge 2 characters… in the toolbar. The dialog lists what moves to the name you keep, offers to change the cues in the script too, and the notice afterwards has Undo. Our nine characters are different people, so if you open the dialog to look, click Cancel.


Step 9: Add a Costume Item

Each character also has a Wardrobe tab for their costume list.

  1. Select MILO and switch Overview / Wardrobe to Wardrobe.
  2. Type Soggy Biscuits band T-shirt into the new item box and click Add item.
  3. Set Worn on to By story day and select Day 2 and Day 3.

FilmBase finds the shoot days those story days fall on, so the costume gets a usage count just like Beverly, and its budget line will follow the schedule.


The whole script is broken down and checked, every scene has a story day, and Beverly has a daily rate. In the next episode, The Stripboard and the Optimizer, we put every scene on the stripboard, set the number of shoot days, and let the optimizer suggest a shooting order.

Common questions

What is a story day in film production?

A story day is the day in the story when a scene takes place, which is different from the day you shoot it. Costume, hair and makeup plan by story day, because everything a character wears on one story day has to match across all of that day's scenes, even when those scenes are shot a week apart.

What is the Magic Sheet in FilmBase?

The Magic Sheet is the whole breakdown on one grid. Every tagged item has a row, every scene has a column, and a tick means the item is in that scene. You can filter the rows by category, narrow the columns to a range of scenes, switch the columns to story days, and click or drag across cells to tick them.

How do I add an actor to a scene where the character has no lines?

Open the Magic Sheet, show the Cast Members category and click the empty cell where the character's row meets the scene's column. The import only links characters to scenes where they speak, so silent appearances need ticking by hand. On a cast row, the tick also tells the schedule the actor is needed that day.

How does an element's rate get into the budget?

Give the element a rate and a unit, such as $350 per day, on the Elements page. Its usage days count the shoot days its scenes are scheduled on, so the estimated total fills in once the schedule is built and follows the schedule when it changes.

Try it on your own production

FilmBase runs on your own computer, and your projects stay there as files you own.

See pricing